LAMP REWIRE ~ For Safety’s Sake!

Friday, May 3, 2013


When out antiquing I always keep my eyes open for lamps.
This alabaster lamp is one of my recent finds but it didn't come with a shade.
I searched for a good while and finally found this crewel lampshade at TJ Maxx.
I think it's perfect!

alabaster lamp


I had been searching for an alabaster lamp for a while,
but they usually have a price tag that is higher than I am willing to pay.
When I found this one with flower details cut into the marble,
and at a reasonable price...I jumped on it!

The finial is unique...

dwellings


and has quite a few parts.

dwellings


This ceramic lamp was also purchased without a shade.
I am still searching for one but with no luck so far, this one will have to do for now…

DWELLINGS


I really liked the shape, crackle finish, and it also has a unique finial...

DWELLINGS


Old lamps have many great qualities but often the electrical cords and sockets are scary!
This was the plug on the alabaster lamp…

DWELLINGS


And this was the plug on the crackle finish lamp…

014


and the sockets were full of dust and dirt…

DWELLINGS


Rewiring these lamps has been on my to-do list for a LONG time,
and I have been leaving them unplugged ~ for safety’s sake.

So I got busy and rewired them, starting with the crackle lamp.

First I removed the felt bottom…

DWELLINGS


Then loosened the bolt on the bottom…

DWELLINGS 


Once the bolt was loosened all the lamp parts began to separate into different sections…

DWELLINGS


None of the electrical parts could be reused, so I cut the cord…

dwellings


You’ll notice there are no UL markings on the old socket because it is OLD…

dwellings


I purchased a complete lamp rewire kit from Lowes…

dwellings


It has the UL listing…

dwellings


First I inserted the wires into the side of the lamp base…

dwellings


and then fed the wires through the metal tubing that goes up through the lamp to stabilize all the lamp pieces…

dwellings


the metal tubing was then fed up through each part of the lamp…
dwellings


once the wire and tubing was up through the top section of the lamp…

dwellings


the harp bottom was then placed on the metal tubing at the top of the lamp…

dwellings


the bottom part of the socket was placed on top of the harp bottom
and screwed tightly to the metal tubing which tightens all the parts of the lamp back together again....

dwellings


Using a wire cutter to remove approximately an inch of the insulation from each wire,
I then tied the split cords into a underwriter's knot …

dwellings


Then I connected the wires by using a screw driver to loosen the screws on either side of the new socket,
wrapped each exposed wire around one screw on the socket (one is gold and one is silver),
and then use the screwdriver to tighten the screws to hold the wires in place.

dwellings 


Attached the top of the socket housing…

065 


Tightened the screw on the socket…

dwellings


Attached the harp and then added a light bulb…

dwellings 


Placed the pretty shade on top so I could plug her in!

dwellings

It really felt good throwing those old cords and sockets in the trash.
Now I can leave these lamps plugged in without worrying.

Have any old lamps that need rewiring?  It's easy-peasy!

I have lots of lamps, here's a peek at Little Lamps that Light the Way.

Blessings,
Cindy

Hop over every Monday for…AMAZE ME MONDAY!
AMAZEMEMONDAY






21 comments:

  1. Cindy I'm so impressed! I often see lamps in antique shops that I like but I've been intimidated to re-wire them. Thanks for such a great tutorial!
    Leslie (Gwen Moss)

    ReplyDelete
  2. Your lamps are wonderful, and you've motivated me to redo a pretty old alabaster lamp that I have. I've needed to do it for years! thanks for the walk-thru!

    ReplyDelete
  3. Oh, I really needed this tutorial!!! Thanks for sharing! You new lamp is so pretty. I LOVE your shade!!!

    ReplyDelete
  4. As a matter of fact, I have an old lamp that belonged to my hubby's grandmother. Are you available? They don't even need complete rewiring, just the switch.

    ReplyDelete
  5. By the way... EXCELLENT TUTORIAL!

    ReplyDelete
  6. You know I have never rewired a lamp before but with your easy tutorial I believe I can do it! Thanks!

    ReplyDelete
  7. I LOVE that you posted this tutorial!!!!! My cousin has been rewiring my lamps for me for YEARS and I finally starting doing my own! But it's SO nice to make sure I'm doing it right! I usually call her (she lives in a different state) and drive her nuts! LOL Now I can look here! :)
    Kristi

    ReplyDelete
  8. Thank you soo much for the tutorial. I've had a lamp for some time that I've been intimated to rewire. Is it the same for a floor lamp? I bought one at an antique sale and have had it over a year. I'm going to try it now. Thanks!

    ReplyDelete
  9. Cindy, I LOVE the toile lamp shade. Is it an oldie? Oh, how I would love one if you could tell me where to find it??

    ReplyDelete
  10. Wow! I'm impressed! Not only do I like the lamps, but I can't believe you know how to rewire them. IMPRESSIVE! You go, girl!

    XO,

    Sheila

    ReplyDelete
  11. I have two very old lamps that need rewiring so thanks for your clear informative tutorial. I think you have helped many of us who felt intimidated about the process. Hope you have a fantastic weekend!

    ReplyDelete
  12. The lamps are so pretty, I wish I knew how to rewire some of mine, maybe I need to try soem day.

    ReplyDelete
  13. That is such a pretty lamp Cindy! Great tutorial on how to rewire too. My Mom does it all the time. I never have tackled one myself. Have a great weekend.

    ReplyDelete
  14. We buy and sell lamps so we rewire many of them. Your alabaster one is beautiful.

    ReplyDelete
  15. I need to do this with a lamp I love but that is about 25 years old. Thank you so much for the detailed instructions and great pictures. I am set to go now!

    ReplyDelete
  16. I just took apart my Grandma's bowl and pitcher lamps (2) and threw the wiring away because I was not sure about them. I could feel the current through the posts.
    I was just going to let them sit on a book shelf. Now I know I can go and rewire them with no problem.
    Thanks for the how-to. I think my Grandma would be proud.

    ReplyDelete
  17. Wow! I think I could do this! I love your lamps. I have a thing for vintage too, but I always pay somebody to rewire. Looks pretty simple!

    ReplyDelete
  18. Thank you! I need to rewire a bunch of old lamps and your tutorial is perfection!

    ReplyDelete
  19. I won't be so afraid to try this now that you've made it look so easy. Thanks!

    ReplyDelete
  20. I LOVE that you posted this tutorial!!!!! My cousin has been rewiring my lamps for me for YEARS and I finally starting doing my own! But it's SO nice to make sure I'm doing it right! I usually call her (she lives in a different state) and drive her nuts! LOL Now I can look here! :)

    ReplyDelete

Your visits make my day and so do your sweet comments. Thank You!

Related Posts Plugin for WordPress, Blogger...